The Types of Plain Linear Bearings

Jun 07, 2024 Leave a message

Box-Way Slides

Box-way slides are a type of linear bearing that consist of a mating base and saddle; these give a T-shaped profile when fitted together. The base is the stationary part that serves as the guide rail, while the saddle is the moving part that acts as the carriage. Adjustable gib plates are installed between the base and the saddle to create preload and remove the clearance between them. Box-way slides have higher load capacity because of their larger contact area between the saddle and the base.

 

Dovetail Slides

A dovetail slide is a type of linear bearing that consists of a base with a protruding V-shaped tongue and a mating saddle that have full contact with each other. Dovetail slides have a higher load capacity. Preloading is not possible with dovetail slides but gib plates can be installed along the length of the saddle to compensate for the clearances.

 

Linear Sleeve Bearings

Linear sleeve bearings, also known as plain linear bushings, are hollow cylinders in which the journal (shaft guide rail) slides in their inner surface. The inner surface is usually coated with materials with a self-lubricating surface (e.g., PTFE). Linear sleeve bearings can handle both axial and radial loads. However, they have lower load capacity and stiffness than box-way and dovetail slides and are frequently used in light to medium-duty applications.

 

Fluid Linear Bearings

Fluid linear bearings use a thin layer of fast-moving pressurized fluids such as oil, air, and water. There are two types of fluids. Hydrostatic fluid bearings require the use of pumps to pressurize the fluid in order to lift the carriage from its guide rail. On the other hand, hydrodynamic fluid bearings rely on the high-speed motion of the carriage to pressurize the fluid.

 

Magnetic Linear Bearings

Magnetic linear bearings rely on magnetic force to levitate the carriage from its guide rail. They also have higher loading capacities due to strong magnetic force. However, the electromagnets present in these bearings can damage the mounted electronic components.